Screen Stencil Making Equipment
Screen Stencil Making Equipment
Stretching Machine
Air-type clamp bar/mesh tensioner
Low-cost/simple type
| Model | W-60 | W-100 |
| Extension stroke | 60mm | 100mm |
| Size (length × width) | 440×250mm | 520×250mm |
| Cylinder bore | 50mm | |
| Air pressure to be used | 0.4～0.8MPa | |
Simple air stretcher/MS-2000B
For PCB or single frame / screen stretching;
utilizes two stage pulling structure
| Machine dimensions (W×D×H) | 2080×2030×1010mm |
| Maximum Effective frame dimensions |
Approx. 950×950mm B22.5° |
| Minimum Effective mesh width |
1550mm (60inch） |
| Supplied air | 0.7Mpa(MAX) |
| Power source | AC100V 1φ 5A 50/60Hz |
Motor-driven type/long base
General purpose type, mass production machine
| Machine dimensions (W×D×H) | 1500×1800～3800×925mm |
| Maximum Effective frame dimensions |
Approx. 750×750mm B22.5° |
| Minimum Effective mesh width |
1000∼1220(40～48inch) |
| Supplied air | 0.7MPa(MAX) |
| Power source | AC200V 3φ 15A 50/60Hz |
Automatic air stretcher/AR500
For precision substrates, high-precision, high-quality; machine for only single frame / screen stretching.
Using corner clamps and variable clamps, variation in tension is improved.
By unifying the clamp bar, screen deformation is improved.
By unifying the clamp bar, screen deformation is improved.
| Machine dimensions (W×D×H) | 1700×2030×820mm |
| Maximum Effective frame dimensions |
950×950mm B22.5° |
| Minimum Effective mesh width |
1350mm (53inch） |
| Supplied air | 0.5 Mpa (5 kgf/m2) or more |
| Power source | AC100V 1φ 5A 50/60Hz |
Drying Machine
Hot air circulation-type/MS-DRYER vertical type
Temperature control and reduction in defects
| Machine dimensions (W×D×H) | 840×1400×1535mm |
| Maximum Effective frame dimensions |
950×950mm |
| Frame storage number | 6 vertically |
| Temperature method | Heater |
| Power source | AC200V 1φ 20A 50/60Hz |
Hot air circulation-type/MS-DRYER-12 horizontal type
Temperature control and reduction in defects
| Machine dimensions (W×D×H) | 1540×890×1895mm |
| Maximum Effective frame dimensions |
550×650mm |
| Frame storage number | 12 vertically |
| Temperature method | Heater |
| Power source | AC200V 1φ 20A 50/60Hz |
Coating Machine
Air-type automatic coating machine/MCM-L coater
Low-cost/general purpose type
| Machine dimensions (W×D×H) | 1965×600×2000mm |
| Maximum Effective frame dimensions |
1000×1200mm |
| Coating speed | 30～800cm/min |
| Supplied air | 0.5 MPa 4.1 L/cycle |
| Power source | AC200V 3φ 5A |
Exposure Machine
Vacuum contact-type/MS-printer-A type
Standard type, low-cost
| Machine dimensions (W×D×H) | 2 type: 1400 × 1500 × 1150 mm |
| Maximum frame dimensions | 1100×1100mm |
| Contact type | Blower |
| Lamp | 3 Kw metal halide lamp |
| Power source | AC200V 1Φ 30A |
Vacuum contact-type/MS-printer-F type
For high-precision screen stencils, with pseudo-collimated light
| Machine dimensions (W×D×H) | 2 type: 1480 × 1480 × 1170 mm |
| Maximum frame dimensions | 950×950mm |
| Contact type | Blower |
| Lamp | 3 Kw metal halide lamp |
| Power source | AC200V 3Φ 40A 50/60Hz |
Clamp type/MS-P400
For precision screen stencils, with pseudo-collimated light
| Machine dimensions (W×D×H) | 810×700×1750mm |
| Stage glass | 690×600mm |
| Effective exposure area | 400×400mm |
| Supplied air | 0.4ＭPa |
| Power source | AC200V 1Φ 20A 50/60Hz |
Development Machine
Compact automatic type/MS-WASHER
Low-cost, productivity and quality improvement
*Option: Air knife can also be equipped.
| Machine dimensions (W×D×H) | 1700×1500×2140mm |
| Maximum Effective frame dimensions |
950×950mm |
| Spray method | Vertical driving method |
| Weight | 400kg |
| Power source | AC200V 3φ 50A 50/60Hz |
In-line automatic type/three-layer development machine
Screen stencil making cost reduction, productivity, quality improvement
| Machine dimensions (W×D×H)(W×D×H) | 3500×1400×2200mm |
| Maximum Effective frame dimensions |
950×950mm |
| Spray method | Vertical driving method |
| Air knife | Blower type |
| Power source | AC200V 3φ 50A 50/60Hz |
Mobile high-pressure washing machine/Power Jetter
Low-cost, small space, work efficiency improvement
| Machine dimensions (W×D×H) | 380×408×640mm |
| Pump | Triple piston type |
| Water volume | 10 ℓ/min |
| Water supply type | Self-suctioning, multi-use directly connecting to faucet |
| Power source | AC00V 1φ 0.7kW |
Film Thickness Meter
Air-type film thickness meter/MS-TM
Low-cost, high-quality, quality improvement
*Options: printer and stage table can be equipped
| Machine dimensions (W×D×H) | 440×870×455mm |
| Maximum Effective frame dimensions |
950×950mm |
| Measurement precision | ±0.002mm(20℃） |
| Supplied air | 0.5Mpa(MAX) |
| Power source | AC100～240V 1Φ 50/60Hz |
Magnetic simple film thickness meter/Sanko Electronics SP-3300D
Probe type, simple operation
| Machine dimensions (W×D×H)(W×D×H) | 190×200×54mm |
| Measurement range | 0 to 300 µm (custom: 0 to 500 µm) |
| Measurement precision | ±1 µm with respect to even surface or ±2% of displayed value |
| Display resolution | 1μm |
| Power source | AC100～240V 1φ 1.3A |
Inspection
Honeycomb board type/pinhole inspection machine
Visibility and productivity improvement, reduction in inspection mistakes
*Options: Automatic plate raising/lowering possible with foot switch
| Machine dimensions (W×D×H) | 1000×650×1600mm |
| Maximum Effective frame dimensions |
1000×1000mm |
| Structure | Honeycomb board |
| Lighting type | 100 W × 3 fluorescent lights |
| Power source | AC100V 1Φ 5A 50/60Hz |
Film
Drum method/image setter
Screen stencils for positive film production
| Machine dimensions (W×D×H) | 1120×2485×1170mm |
| Film size | W660/610/558/508×D940/812mm |
| Resolution | 4,000dpi |
| Speed | 5 min/sheet (output), 10.5 min/sheet (output and development) |
| RIP | FOUNDER |
Inkjet printer/JV series
For positive film production, water type
| Machine dimensions (W×D×H)(W×D×H) | 2775×700×1392mm |
| Resolution | 360～1440dpi |
| Printing method | On-demand piezo head |
| Maximum printing width | 1610mm |
| Power source | AC100～120V/220～240V 1φ |
Light Table
Light table/LTR-A0
Positive film, for inspecting screen stencils
| Type | Standard | Large |
| Main body dimensions | 1000×800×750 | 1400×915×750 |
| Glass dimensions | 1000×800 | 1400×915 |
| Fluorescent light | 32W×2 | 40W×3 |
| Power source | AC100V φ1 | AC100V φ1 |
For Screen-Printing